home burglar alarm device, based visual physiology, combining barrier-free technology and wireless communication technology, using human design, achieve radiation-free, low consumption, multi-way safety note. When the door or window opened, the magnetic touch alarm device is activated. And the alarm way is flexible, which can remind people by flashing or siren or vibration, or both of them, according to peoples choice, and the installation is simple. 2. Technical Specifications: <1>Technical specification of alarm device: Components: Transmitter and receiver Input battery: DC12vA23 AC 220V 50Hz Rated Power: 15mw 5w Environment Temperatur: -5~45 -5~45 Size: 7.8*3.6cm*1.6cm (transmitter) 11cm*7.6cm*5cm (receiver) <2>Technical Specification of vibrator Components: Vibration disk Input battery: DC 9V (battery model: 6F22) Rated powe: 1w Environment temperature: -5~45 Size: 10cm*10cm*3cm

Features: 1,This product use GSM SIM card. It can send MMS images to MMS supported mobile phone with a color display or to an e-mail address. 2,Remote control: control & configure the camera with SMS command from mobile phone. 3,Rea-time audio: call the camera number (SIM card) to listen in voices. 4,Motion detection: Detect and alarm any motion within the monitoring area. 5,Sensor detection: Max connects 15 sensors such as door magnet sensor, infrared body sensor, smoke sensor, gas sensor etc. Any sensor active will alarm by SMS. 6,Infrared light: Even in dark environment, camera can get clear image with the built-in infrared LEDs. 7,Special Camera: 300,000 pixel CMOS camera, get clear image for MMS. 8,Send images to mobile: The camera will send MMS images to your mobile phone and you can check them anywhere. 9,Send images to email: The camera can send MMS images to pre-set email and you can check the image in your email anytime. 10,Multimode alarm: Camera can send alarm messages by SMS, MMS, e-mail or standard phone-call. 11, Fixed time monitor: Monitor schedule can be set flexibly with multiple time-intervals. 12,Easy installation: Wireless connection. The product can be installed at any place you wanted. 13,Accessory: Include 2 remote controls for manual operation on/off and panic button. 14,Built-in Lithium battery: Rechargeable battery ensuring operation in case of external power failure 15,Download user manual: Manual can be downloaded anytime using SMS command.

Parameter: 1. Standard frequency of double audio frequency: Low frequency group 697, 770, 852, 941Hz; High frequency group1209, 1336, 1477, 1633Hz; Frequency deflection: <1.5%. 2. Electronic lever: Low frequency group--9dbm 3dbm, high frequency, group--701dbm, 3dbm. 3. Time delay to arm: 0~99 seconds (you can set by yourself) 4. Siren hooting time: 1~30 minutes (set by yourself), more than 30 minutes the siren will hoot all the time. 5. Standby current: <25mA DC 9V 6. Working current: <200mA 7. Environmental condition: -10 ~ 45 degree, humidity: Less than95% 8. Power supply: 9V, 300mA. Description: 1) Compact design, Orange backlight, big LCD Screen Display. 2) Illegally arm/disarm function(optional); 3) Can dial via neighbor's phone when phone line is cut off; 4) Low power indication function; 5) 40 zones LCD display with 32 wireless zones and 8 wired zones; 6) program 3 groups of time to timely arm or disarm the alarm system; 7) Voice Instruction; 8) Arm/disarm each zone separately 9) compatible with the international Digital Communication Standard- Ademco protocol such as CONTACT ID

Power supply: Input AC 110V; 220V; 230, 240V; Output DC 9V, 300mA Frequency: 315MHz/433MHz Stand-by current: d 20mA Alarm current: d 150mA Operating range: Up to 150 meters in open place Siren: e 110dB Temperature range: -10 ~ 50 degree Relative humidity: d 90% Dimension: 340x 250 x 78mm (Gift box)

DIY, Wireless installation, Easy-to-operated. International famous chipset 2262 coding, advanced beaverboard, automatization producing pipelining, so the control panel is so stable with strong compatible function. It is integrated with home, business store, public plaza security and so on intelligent home function. Widely used for signal home, residential area, school, factory, electric power Dept. Oil Dept, railway Dept. City planning Dept. Police Dept. All industrial security and protection system. Features: 1. 8 wireless different zones and 4 wires zones 2. Long-distance monitoring and alarm protected zone recheck 3. 13 LED to indicate the alarm zone. 4. To program 6 phone number 5. Multi-armed mode: Delay armed, armed without auto-dial up 6. Prompt sound for each alarm 7. With keyboard to program each function 8. In-coming calling times to be programmed 9. Telephone trunk protected 10. Battery back-up, built-in panel. 11. While alarm is happened, it can track the alarm zone by real time through long-distance Specification: 1. Wireless frequency: Two option: 433MHz or 315MHz 2. An adaptor: Option: Input electricity from 110 ACV ~240 AC, customized. Adaptor choosing: Two round pins, two flat pins, three pins customized 3. Wireless receiving distance in open place: >250m, indoor: 30~50m (depend on the surrounding environment and wireless interference) 4. Standby current: < 15mA 5. Alarm volume: Internal: 95dB, external siren: 110~120 dB 6. One control panel with one internal siren: Working voltage: +9 DCV, 200mA. 7. Two wireless remote controllers: Four button: Disarm/arm/panic/PIR detector 8. One wireless magnetic door sensor: 12 DCV

Product introduction: Adopting wireless GSM network and advanced digital technology, it is combined with photo capture system to protect for home, office building, public place. Absolutely wireless solution control, without phone cable, avoid phone trunk cut-off, easy-to-operated and neoteric, it also features advanced voice guide for operation and different zone different SMS message. Features: 1. 12 wireless zone, 2 wire zone 2. Three different alert setting: 1. Panic call, 2. SMS only, 3. Telephone call only. 3. Wire panic zone can be set, system can make panic call and SMS. 4. System AC power shut off alert 5. SMS control system armed/disarmed/power status/initial reset 6. High siren or horn to scare away intruder 7. Talk-back through speaker(extension function) 8. Voice guide to retrieve alert message 9. Voice guide to remote operation and control to avoid wrong operation 10. SMS to remind of error operation 11. Learning wireless horn or flashing siren to enable to be armed/disarmed synchronously through telephone 12. Default zone name and message, different zone for different SMS message. 13. Compatible with centre monitoring station 14. If using GSM centre monitoring station, it can arm/disarm the users' control panel by two ways. 15. Adopted advanced processor to monitor CPU working status. If control panel failure, please reset it and restart it. 16. Back-up battery inside control panel to keep continues to work if AC power shut-off 17. Memory function, if power is cut off, the setting is not lost 18. Take pictures as alert is happened. It can work with picture capture (Simple CCTV surveillance system) 19. Entry/exit door delay automatically (updating). Specification GSM Band: GSM 900/1800MHz (850MHz optional) power: 1W. Data respond: Time ≤10s Power: DC12 v /AC 220V 50Hz( optional to change) System power: < 3W Back-up battery: DC 7.6V 800mA, standby expensed power ≥20hours Lower power protection: Time ≤1 s Working condition: Temperature: -20~+60degree humidity: 20~95% Weight: Net: 0.6Kg Gross: 0.8Kg Size: 180mm(L)x130mm(W)x32mm(H) Standard pack: One metal case with main unit, one wire mini Siren built-in case, Backup battery. 1x Dual PIR motion detector, 1X door sensor, 2X remote controls. 1x keyboard. More sensors, please add it.

DIY, esy-to-install and operation. Cost-effective. Multi-functional and useful for home and commerce! Solar panel plus to make easy to use in place under sunshine. Featurs: 1. Protection different zone: 32 zones with 32 different zones indicated on panel. 2. Each zone can be put more sensors. 3. Partial disarmed optional by remote control. One keypad easy to partial disarmed Some sensors that programed in the second zone. 4. Auto-dial up 6 phone numbers and recycle to repeat unless confirmed. 5. Store voice recorded message (10 second), it can be recovered. When received alarm Message, it speaks as you spoken. 6. Ni-MH rechargeable battery to back up power: >24 hours. Auto-switch if AC power is off. 7. Telephone manages the alarm system, convenience. 8. Phone trunks protected to avoid any designing destroy. 9. LED on the panel to display protection zone. 10. PIR detector is preset for the second zone which can be disarmed solely 11. Audible / mute siren optional. 12. Quick program by the panel keyboard. 13. When received alarm call, you can press the keypad on the phone to disarm / arm / monitoring / start on / off siren 14. Panel keyboard password protected and incoming calling password protected. 15. Alarm time can be customized. 16. Siren sounds time / alarm triggered time / armed alarm times to be programmed to be delayed 17. All panels can connect with the alarm receipt managing centre 18. Easy to learn the new remote control to change the code and work with new sensors 19. Solar panel: 1200mA/9v Batterty to support 7days as standby. More capacity is optional to select. Specification: 1. Wireless frequency: Two option: 433MHz or 315MHz 2. An adaptor: Option: Input electricity from 110 acv ~240 AC, customized. Adaptor choosing: Two round pins, two flat pins, three pins customized 3. Wireless receiving distance in open place: >200m, indoor: 30~50m, (depend on the surrounding environment and wireless interference) 4. Standby current: < 10ma 5. Alarm volume: Internal: 95dB, external siren: 110~120 dB 6. One control panel with one internal siren: Working voltage: 9 dcv, 500ma. Panel Size: 30x22x70cm 7. Two wireless remote controllers: Four button: Disarm / arm / panic / PIR detector 8. One wireless magnetic door sensor: 12 dcv 9. One wireless infrared detector: 10m*120degree horizontal 60degree vertical 10. Optional sensor: Wire siren, wireless smoke detector, gas leakage detector, vibration Sensor, outdoor external siren with strobe, remote control, all sensors as we selling 11. Packing box: 31.5*25.8*7.5cm; Carton (10sets): 65*28*40cm. Standard package: One control panel, one magnetic door sensor, One PIR detector, two remote controllers, one telephone line, one adaptor, one instruction. CCTY Survelliance system is optional. DIY! Upgraded, This CCTV system is learning code. Easy-to work with wireless detectors diretly, uses two cameras, two channels auto-take per 16 PCS photos per channel when alarm is triggered. (total is 32 PCS photoes, 64 PCS optional) output audio&video. CCTV two channels Real-time watch through Monitor.

Features: GSM 900/1800/1900 bands, can be used in most parts of the world Full duplex communication with the host Monitor the scene environment Voice and message alert Set alarm ON or OFF by remote controller Can set Home Arm and Out Arm mode(Partial Arm Function) Call in to set alarm ON, OFF, Monitor, Output, Intercom. Send SMS to set alarm ON, OFF, Monitor, Output 5 group phone + room number 1 group alarm monitor center phone number 2 group phone to report arm and disarm status Can program 7 groups of alarm messages 3 zones for wired detector 16 zones for wireless detector 2 outputs, can be used with external circuit to control home appliance Easily set ON or OFF for every wired or wireless detector SMS inform if external power failure or recovery Technical Parameter: Static Current: ≤ 20mA Alarm Current: ≤ 400mA Wireless Receiving Frequency: 433MHz± 0.5MHz/315MHz± 0.5MHz Wireless Receiving Sensitivity: 433MHz± 0.5MHz/315MHz± 0.5MHz Anti-interference: 1V/m(frequency: 20-1000 MHz) GSM frequency: 900/1800/1900MHz Outer Alarm siren volume: 110dB Working condition: Temperature: -10~50 Humidity: ≤ 90% Wired Zone: 3 Wireless Zone: 16 Basic component: - Alarm system (control unit) 1 PC. - Wireless PIR detector 1 PC. - Wireless door (gap) sensor 1 PC. - Remote controller 2 PCS. - Antenna 1PC. - Mini wired siren 110dB/0.3m 1 PC. - Power adpater 1PC. - User manual 1PC.

Wireless type, easy to install, without phone line. 2. Remote control, convenient. 3. Password protected 4. SMS to enable arm/disarm, partial arm/disarm, siren 5. High siren volume so to scare away intruders 6. SMS and auto dial up three phone numbers, locale monitoring start on. 7. SMS to recheck the GSM panel status, alarm report, zone name, arm/disarm status. 8. Audible/mute siren programed 9. Panic help 10. AC power shutoff self-detected to avoid malice destroied, automatically switch to battery back-up 11. Enable to receive signal from GSM car alarm system 12. Enable to setup alarm receiving central through GSM network 11 zones wireless and 2 zones wired. No telephone line needed. Remote management: Armed /disarmed. Partial disarmed Auto dial 6 phones or SMS function. Password protected, siren time customized. Electrical aplliance control to be added and ordered Specification: 1. Protection zone: 40(8 wired and 32 wireless) 2. GSM band: 900/1800/1900mHZ

Automatic dialing stored phone numbers High loudness speaker alarming on site Guard arrangement, evacuation, muting and emergency calling operated by remote controller Long distance host control by telephone to achieve the function of a remote controller Intelligent crimes identification Automatic sound recording Long distance alarm site monitoring by telephone Automatic AC/DC switching

1. 1-99 LED defense zone, with digital number to show the defense zone 2. With Ademco Contact ID protocol, to work with the monitoring station. 3. Auto-dial six telephone numbers when alarming. 4. Can set the home arm and away arm functions. 5. To input the password before operation. 6. Record 10 seconds voice message. 7. With built-in backup battery, to last 24 hours for power failure.

Features: 1. Wireless type, easy to install, without phone line. 2. Remote control, convenient. 3. Password protected 4. SMS to enable arm/disarm, partial arm/disarm, siren 5. High siren volume so to scare away intruders 6. SMS and auto dial up three phone numbers, locale monitoring start on. 7. SMS to recheck the CDMA panel status, alarm report, zone name, arm/disarm status. 8. Audible/mute siren programmed 9. Panic help 10. AC power shutoff self-detected to avoid malice destroyed, automatically switch to battery back-up 11. Enable to setup alarm receiving central through CDMA network. Specification: 1. Protection zone: Wired: 2 wireless: 11 2. CDMA band: 800MHz It can save six alarm telephone number and separately set SMS function or telephone alarm. Transmitting power consumption: 1W 3. LED indicators: 8 4. Low power protected time: <1 s 5. Data responds time: <10s (standard network) 6. Working power voltage: AC 110~220V 50-60Hz (optional) Panel power consumption: <3W Battery back-up: DC 9v Standby last >4 hours 7. Working condition: Temperature-20~+60Centigrade degree Humidity: -20~+60Centigrade degree 8. Net weight: 0.75 KG. Gross weight: 0.85kg. 9. Panel Size: 180mm(l)*130mm(w)*32mm(h) 10. Standard package: One CDMA module, one remote keyboard, two remote controllers, One PIR, one door magnetic sensor., one siren output, one adaptor, speacker(ooptional), remoteelectric control(optional)

1. Auto dial 6 phone numbers while alarm is triggered 2. 10 second Voice message recording 3. Siren accompany sound ON/OFF when using remote controller 4. Change the ringing times of the telephone when far away control 5. Telephone line anti-cut alarm function 6. Alarm with siren on/off 7. The alarm siren volume is adjustable 8. Built-in siren, external siren optional 9. The systems back to original setting function 10. Back up lithium battery built-in, turn on/off battery 11. Learning code, can learn 32 wireless detector and 5 remote controllers 12. Bypass for the 2ND zone-PIR

Intelligent home security and safety system GSM Wireless Security Burglar/Intruder Alarm System Description: 1. Wireless type, easy to install, without phone line. 2. Remote control, convenient. 3. Password protected 4. SMS to enable arm/disarm, partial arm/disarm, siren 5. High siren volume so to scare away intruders 6. SMS and auto dial up three phone numbers, locale monitoring start on. 7. SMS to recheck the GSM panel status, alarm report, zone name, arm/disarm status. 8. Audible/mute siren programmed 9. Panic help 10. AC power shutoff self-detected to avoid malice destroyed, automatically switch to battery back-up 11. Enable to setup alarm receiving central through GSM network.

8 wireless defence zones GSM home alarm,CCC, CE, ROHS approved, wireless alarm system, security alarm system 1. 10seconds voice and message recorded to transmit an alarm 2. Preset 6 phone numbers which can be dial automatically to inform theft 3. The PIR detector can activate or deactivate separately 4. Arm or disarm with remote controller or phone in long-distance under password protection. 5. Alarm phone line has a priority when the phone line is engaged 6. User does not need to connect it with phone line because it can work as a mobile unit 7. Send short message to alarm 8. With built-in Lithium battery 9. Set up siren hooting time Parameter: Package: 34x25x7. 8cm Input: 220v/9v(AV/DV switch) Output: DC9V300mA Stand-by current: Equal to or less than20mA Alarm current: Equal to or less than 150mA Record time: 10 seconds Deposited phone numbers: 6 Frequence: 315MHZ, 433MHZ Siren sound: Equal to or more than 110dB