Built-in RF module to work with any of climax’s alarm systems, offering a total IP solution with surveillance for a full-featured or mini alarm solution as you desire Simple Plug-and-play installation Night surveillance: mini illumination support up to 0 lux and 10 meters Standalone purposed for simple monitoring only Image capture triggered by alarm system with 10sec pre-alarm and 5sec post-alarm, at about 3 frames per second First 8 events w/image capture can be stored, later events will still be recorded w/o image capture Embedded web GUI configuration with administrator ID/password protection Allows remote access from web browser for 24-hour live viewing Supports TCP/IP networking, UPnP, HTTP, NTP, DNS, DDNS, DHCP, SMTP, and IEEE 802.11 a/b/g Supports 10/BaseT/100BaseTX Ethernet with Auto-MDI/MDIX NAT traversal: the video can be viewed by connecting to internet without configuration nor setting the IP address NTP support: auto-sync system time with network time server and thus guarantees the accuracy of camera’s image time DVR (local video recording): an user-friendly Microsoft Windows software is supplied to watch the real-time image and video When you need to leave, you may record image/video and save to your storage device The recorded files are standard Windows media format that are viewable on other multimedia players Single frame image snapshot Image rotation: mirror and flip effects Approval certification: EMI (CE, FCC class B, CCC) Wi-Fi optional: supports WEP (64/128 bit) and WPA to protect wireless security Specification: Sensor resolution: 640 x 480 pixels Sensor: 1/4-inch 0.3 million pixels color CMOS sensor Lens: 3.6mm, F1.8, fixed aperture, visual angle 79° Minimum illumination: 0.2 lux LAN port: RJ-45, 10/100M auto-sensed, auto-MDIX Communication protocol: UPnP, HTTP, FTP, DNS, DDNS, DHCP, SMTP, and IEEE 802.11 a/b/g Image frame rate: QCIF at 30fps, 30fps at CIF, 15fps