Injection Pad

Options available With or without Airvent; With or without Needle; With or without "Y" site (Latex or Latex; Free); Luer lock or luer slip. Designed for transfusion of blood or blood component Moulded latex flush ball injection membrane for intermittent medication Approximately 20 drops / ml Clear, transparent and soft tubing manufactured from medical grade PVC With 200 micron filter and 18 G hypodermic needle.

Disposable Infusion Set Features: Plastic spike, flow regulator, injection port, needle connector, needle, Y-site, filter, tube For infusion bags and bottles Slip or lock adapter For gravity use Latex/latex-free Sterilized by EO gas, sterile, non-toxic, pyrogen free Certificate: CE, ISO9001, ISO13485

Disposable Infusion Set Features: Plastic spike, flow regulator, injection port, needle connector, needle, Y-site, filter, tube For infusion bags and bottles Slip or lock adapter For gravity use Latex/latex-free Sterilized by EO gas, sterile, non-toxic, pyrogen free Certificate: CE, ISO9001, ISO13485

Disposable Infusion Set Features: Plastic spike, flow regulator, injection port, needle connector, needle, Y-site, filter, tube For infusion bags and bottles Slip or lock adapter For gravity use Latex/latex-free Sterilized by EO gas, sterile, non-toxic, pyrogen free Certificate: CE, ISO9001, ISO13485

Disposable Infusion Set Features: Plastic spike, flow regulator, injection port, needle connector, needle, Y-site, filter, tube For infusion bags and bottles Slip or lock adapter For gravity use Latex/latex-free Sterilized by EO gas, sterile, non-toxic, pyrogen free

Material: PE/TPE Transparent drip chamber with filter and air vent Flexible tubing with standard length of 150cm With flow rate control PP or ABS material Luer slip or luer lock adapter with hypodermic needle Sterilization, Non-toxic, Non- pyrogen

Needleless infusion connector Easy to operate Prevent to infect blood Antibiotic material for hub Avoid thrombus with positive pressure.

1) Transparent drip chamber with filter and air vent 2) Flexible tubing with standard length of 150cm 3) With flow rate control PP or ABS material 4) Luer slip or luer lock adapter with hypodermic needle 5) With latex or latex free connector or Y-injection site 6) Sterilization, Non-toxic, Non- pyrogen

1) Transparent drip chamber with filter and air vent 2) Flexible tubing with standard length of 150cm 3) With flow rate control PP or ABS material 4) Luer slip or luer lock adapter with hypodermic needle 5) With latex or latex free connector or Y-injection site 6) Sterilization, Non-toxic, Non- pyrogen

Products: I. V. Solution Administration Sets. Consist of: 1. Piercing device--Made of medical grade white ABS, with or without air Inlet, 3 or 4 holes size according to ISO8536-4 standard. 2. Protective cap--Made of PP or PE. 3. Drip chamber--Made of soft PVC, size according to ISO8536-4 Standards, 4.5cm--7cm in length. 4. Fluid filter--Support is made of ABS or PE, nylon net, mesh size: 15 micron. 5. Air inlet--Cap is made of red, white, or blue PP 6. Water-repellent filter-PP support, hydrophobic filtering paper, made of Acrylic resin and nylon. 7. Flow regulator--Made of PP or ABS, normal shape, small size or horned Shape, large size. 8. Injection site--Latex cone, rubber cone, synthetic rubber cone, Y site- Made of hard transparent PVC+injection site made of natural or synthetic Rubber. 9. Soft tubing--Made of soft medical grade PVC, diameter 3x4mm, 150cm in length, or adjust according to requirements... 10. Terminal connector: Made of PE, PVC, luer lock or luer slip. 11. Components assembly: By gluing with solvent cyclohexanone Specification: They are suited to hard containers and soft bags( without air inlet type) Sterile, non-toxic, pyrogen free, sterilized by EOG. Packing: 1pc/blister package 20pcs/mid. PE bag, 20 bags/ctn carton size changes according to the specific volume of products. (volume is up to Chamber size, tube length, different components) 1pc/polybag (HDPE, LDPE, compound film), 20pcs/mid. PE bag, 20bags/ctn, carton size changes according to the specific volume of Products. Remark: You can also give us your specific requirements to confirm the products you need finally.

Disposable Blood Transfusion Set

I.V FLOW REGULATOR It is mainly used for regulating the flowing rate of infusing fluids when clinical infusion.It is designed for use with most common partenteral fluids.

Nasal Oxygen Cannula catheter-1 Consist of: Soft Tube, nasal suckers, thin tubes, connector, Y shape part, fix ring. Specification: Soft Tube about 1.9m in length, with 6 protuberant veins That stand out at the inner surface, this can help to prevent from flexure. Thin tubes about 50cm in length(for one), the nasal suckers are soft and comfortable. Length can be adjusted according to specific requirement. Sterilized by EOG. 2. Oxygen Mask catheter-2 Consist of: Connector, soft tube, face veil(cover) with or without astomization device, elastic loop Specificaton: Clear and soft vinyl veil is comfortable for patient. And it's transparent to observe patient's situation easily. Aluminium nose clip is adjustable and fix to comfortable position and shape. No smell, the tube is with 6 protuberant veins that stand out at the inner surface, this can help to prevent from flexure, long 1.8m~2.1m Sterilized by E. O. G

1 with or without air Inlet, 3 or 4 holes size according to ISO1135-4 standard. 2. Protective cap-Made of PP or PE. 3. Drip chamber-Made of soft PVC, size according to ISO1135-4 Standards. 4. Fluid filter-Cylinder support is made of ABS or PE, nylon net. Mesh size: 15 micron. 5. Air inlet-Cap is made of red, white, or blue PP. 6. Water-repellent filter-PP support, hydrophobic filtering paper, made of Acrylic resin and nylon. 7. Flow regulator-Made of PP or ABS, normal shape, small size or horned shape, large size. 8. Injection site-Latex cone, rubber cone, synthetic rubber cone, Y Site-made of hard transparent PVC+injection site made of natural or Synthetic rubber. 9. Soft tubing-Made of soft medical grade PVC, 3x4mm, 150cm In length, or adjust according to requirements. 10. Terminal connector: Made of PE, PVC, luer lock or luer slip. 11. Components assembly: By gluing with solvent cyclohexanone. Specification: They are suited to hard containers and soft bags( without Air inlet type) Sterile, non-toxic, pyrogen free, sterilized by EOG.