High-stability, time keep clock signal, small package Suitable for small telecommunication equipment Excellent environmental capability Crystal cut: AT –CUT or 3rd AT-CUT Load capacity: series or 10 to 32 PF Calibration tolerance (at 25℃ ): +/-20ppm , +/-30ppm or +/-50ppm Frequency stability: +/-20ppm , +/-30ppm or +/-50ppm Operating temperature range: -10 ℃ to +60℃ Shunt Capacitance ( Co ): 7 pF maximum Equivalent series resistance ( E.S.R.): See table 1 Aging (per year at +25℃ ): +/-5 ppm Drive Level: 0.3mW maximum Shock Resistance: drops onto a hard wood board from the height of 75 cm Insulation Resistance: 500M? min.

SMD crystal resonators which operate on the 32.768KHz frequency Cylinder type C-001r (3 x 8) C-002rx (2 x 6)/C-2 type/C-4 type

High-stability, time keep clock signal, small package Suitable for small telecommunication equipment Excellent environmental capability Frequency range: fundamental mode 20.0 ~ 27 MHZ Crystal cut: AT –CUT or 3rd AT-CUT Load capacity: series or 10 to 32 PF Calibration tolerance (at 25℃ ): +/-20ppm , +/-30ppm or +/-50ppm Frequency stability: +/-20ppm , +/-30ppm or +/-50ppm Operating temperature range: -10 ℃ to +60℃ Shunt Capacity ( Co ): 7 pF maximum Equivalent series resistance (ESR): 80ohm Aging (per year at +25℃ ): +/-5 ppm Drive Level: 0.3mW maximum Shock resistance: drops onto a hard wood board rom the height of 75cm Insulation resistance: 500M? min.

High-stability, time keep clock signal, small package suitable for small telecommunication equipment Excellent environmental capability SPK type: Frequency range: SPK206: Fundamental mode: 20.0 to 27MHz SPK309: Fundamental mode: 4.0 to 30MHz 3rd overtone mode: 31.0 to 70.0MHz SPK310: Fundamental mode: 3.5 to 6MHz Crystal cut: At-cut or 3rd At-cut Load capacitance: series or 10 to 32pF Calibration tolerance (at 25 degrees Celsius): +/- 20, +/- 30 or +/- 50ppm Frequency stability: +/- 20, +/- 30 or +/-50ppm Operating temperature range: -10 to + 60 degrees Celsius Shunt capacitance: 7pF maximum Aging (per year at +25 degrees Celsius): +/- 5 ppm Drive level: 0.3mW maximum Shock resistance: drops onto a hard wood board from the height of 75cm Insulation resistance: 500M Ohms minimum SPK-309/310: 3.5 to 6MHz: 150 Ohms 6.0 to 10MHz: 100 Ohms 10 to 19.99MHz: 50 Ohms 20 to 33.99MHz: 40 Ohms 34 to 70MHz: 100 Ohms SPK-206: 20 to 33.99MHz: 80 Ohms

Typical applications: Motherboard of computer,consumer electronics,CD-ROM VTR,Data communication,Automotive electronics, Modem , TV game Features: Low profile,bulk, offer fitted insulator, Large range of choice of frequency,Resistance weld Crystal Holder Prefix : 49US: 3.5 mm holder hight 49USS : 2.5 mm holder heihgt Frequency Range : Fundamental Mode 3.2 MHZ ~ 30MHZ 3rd overtone Mode: 27MHZ~ 70 MHZ Crystal Cut: AT –CUT or 3rd AT-CUT Load Capacitance: Series or 8 to 50 PF Calibration Tolerance (at 25℃ ): +/-10ppm ~ +/-50ppm Frequency Stability: +/-10ppm ~ +/-50ppm Operating temperature range: 0℃~50℃ , -10℃~60℃,-20℃~70℃,-30℃~80℃-40℃~85℃ Shunt Capacitance ( Co ): 7 pF maximum Equivalent series resistance ( E.S.R.): See table 1 Aging (per year at +25℃ ): +/-3 ppm Drive Level: 0,0.5,0.1,0.2,0.5,1.0mW (to be specified by customer) Insulation resistance: >500M ? min/DC100V

Features Precise tolerance and large range of choice of frequency Stability over temperature offer fitted insulators Applications communications, Pagers, Long distance cordless phones, automotive electronics, telemetry Frequency Range 6 to 150MHz Mode of oscillation: FUND, 3RD, 5TH Frequency tolerance(at 25 ± 2 degrees): ± 5 to ± 20PPM Frequency stability over temperature: ± 5 to ± 30PPM Operating temperature range: -10 to + 60 degrees Storage temperature range: -40 to + 85 degrees Aging: ± 3 to ± 5PPM/YEAR Load capacitance: 4PF to ∞ (Series) Shunt capacitance: < 7 PF Resistance(ESR) 6 to 10MHz: 70OHM TO 50OHM 10 to 20MHz: 50OHM TO 20OHM 20 to 36MHz: 20OHM(MAX) 3RD: 25 to 100MHz: 60OHM 5TH: 50 to 150MHz: 80OHM Drive level: 1 μW to 100 μW

Description: Quartz crystal tuning fork (bend lead) Frequency range: 32.768kHz, 2 x 6 SMD (bend lead) Application: for watch, clock, remote control, security device, consumer products

Typical applications: Motherboard of computer, consumer electronics, CD-ROM VTR, data communication, automotive electronics, modem, TV game Features: Low profile, bulk, offer fitted insulator, large range of choice of frequency, resistance weld Frequency range: fundamental mode 3rd overtone mode: 1.56 to 30MHz; 27 to 100MHz Crystal cut: AT–CUT or 3rd AT-CUT Load capacitance: series or 8 to 50PF Calibration tolerance: (at 25) +/- 10ppm to +/- 50ppm Frequency stability: +/- 10ppm to +/- 50ppm Operating temperature range: 0 to 50, -10 to 60, -20 to 70, -30 to 80, -40 to 85 degrees Shunt capacitance (Co): 7 pF maximum Aging (per year at +25): +/-3 ppm Drive level: 0, 0.5, 0.1, 0.2, 0.5, 1.0mW (to be specified by customer) Insulation resistance: greater than 500M Ohms min/100V DC 1.56MHz E.S.R. maximum: 800 Frequency: 3.91 to 5.0MHz E.S.R. maximum: 100 1.8432MHz E.S.R. maximum: 600 Frequency: 5.01 to 7.0MHz E.S.R. maximum: 50 2.01 to 3.0MHz E.S.R. maximum: 400 Frequency: 7.01 to 10.0MHz E.S.R. maximum: 35 3.01 to 3.2MHz E.S.R. maximum: 200 Frequency: 10.0 to 30.0MHz E.S.R. maximum: 25 3.21 to 3.5MHz E.S.R. maximum: 150 Frequency: 30.1 to 45.0MHz E.S.R. maximum: 20 3.51 to 3.9MHz E.S.R. maximum: 120 Frequency: 24.0 to 100MHz E.S.R. maximum: 40

Features Precise tolerance and large range of choice of frequency Stability over temperature offer fitted insulators Applications communications, pagers, long distance cordless phones, automotive electronics, telemetry Frequency range 6 to 150MHz Mode of oscillation: FUND, 3RD, 5TH Frequency tolerance (at 25 ± 2): ± 5PPM to ± 20PPM Frequency stability over temperature: ± 5PPM to ± 30PPM Operating temperature range: -10 to + 60 degrees Storage temperature range: -40 to + 85 degrees Aging: ± 3PPM to ± 5PPM/YEAR Load capacitance: 4PF to ∞ (series) Shunt capacitance: < 7PF Resistance(ESR): 6 to 10MHz: 70OHM TO 50OHM 10 to 20MHz: 50OHM TO 20OHM 20 to 36MHz: 20OHM (MAX) 3RD; 25 TO 100MHz: 60OHM 5TH: 50 TO 150MHz: 80OHM Drive level: 1 to 100μW

MHz range crystal unit cylinder for CA-301 Frequency range: 4 to 64MHz Thickness: Φ 3.1mm Overtone order: Fundamental 3rd overtone (30 to 64Mhz) Applications: for clock of integrated circuit Lead (Pb)-free: lead free completely Specifications (characteristics): Mominal frequency range: Symbol: f Spec: 4.000 to 29.999, 30.000 to 64.000MHz Remarks: fundamental Temperature range: Storage temperature: Symbol: T-stg Specifications: -40 to 85 degree Celsius Remarks: sotred as bare product after unpacking Operating temperature: Symbol: T_use Specifications: -20 to 70 degree Celsius Remarks: operating temperature range is -10 to 60 degree Celsius for 5.5MHz and below Level of drive: Symbol: DL Specifications: 10 to 100 uW Frequency tolerance: Symbol: f_tol Specifications: +/- 30 x 10 to the -6th power (under 5.5MHz +/- 50 x 10 to the -6th power, +/- 100 x 10 to the -6th power) Remarks: 25 degree Celsius Frequency versus temperature characteristics (standard): Symbol: f_tem Specifications: Under 5.5MHz +/- 50 x 10 to the -6th power Over 5.5MHz +/-30 x 10 to the -6th power Remarks: -10 to 60 degree Celsius 20 to 70 degree Celsius Load capacitance: Symbol: CL Specifications: Fundamental: 10 pF to infinity Overone: 5 pF to infinity Remarks: pls specify Motional resistance (ESR): Symbol: R1 Specifications: As per below table Remarks: -20 to 70 degree Celsius, DL = 100 uW Frequency aging: Symbol: f_age Specifications: +/-5 x 10 to the -6th power/year max. Remarks: 25 degree Celsius, first year

SMD crystal from 12 to 36MHz Standard frequency: stocks Non-standard frequency: about 30 days Frequency: 12 to 36MHz Frequency accuracy at 25 degrees Celsius: ±30ppm Temperature stability: ±50ppm Operating temperature: -10 to +60 degrees Celsius Maximum aging: ±10ppm/year Size: (L) 4.0 x (W) 2.5 x (T) 1.2mm Mode of oscillation: fundamental Load capacitance: 20pF and others Packing: 1,000 pieces/reel

TA6C/6CA series: SMD crystal from 8 to 40MHz 1,000 pieces/reel Standard frequency: stocks Non-standard frequency: 15 to 25 days Part number: TA6C/6CA Frequency: 8 to 40MHz Frequency accuracy at 25 degrees Celsius: ±30ppm Operating temperature: -10 to +60 degrees Celsius Maximum aging: ±10ppm/year Dimensions: (L) 6 x (W) 3.5 x (T) 1.6mm Temperature stability ±50ppm Mode of oscillation: fundamental Maximum shunt capacitance: 7pF Load capacitance: 20pF and others

TA7C/7CA series: SMD crystal from 7.6 to 35MHz 1,000 pieces/reel Standard frequency: stocks Non-standard frequency: 15 to 25 days Part number: TA7C/7CA Frequency: 7.6 to 35MHz Frequency accuracy at 25 degrees Celsius: ±30ppm Operating temperature: -10 to + 60 degrees Celsius Maximum aging: ±10ppm/year Dimensions: (L) 7.0 x (W) 5.0 x (T) 1.6mm Temperature stability: ±50ppm Mode of oscillation: fundamental Maximum shunt capacitance: 7pF Load capacitance: 20pF and others

TA5C/5CA series: SMD crystal from 10 to 40MHz 1,000 pieces/reel Standard frequency: stocks Non-standard frequency: 15 to 25 days Part number: TA5C/5CA: Frequency: 10 to 40MHz Frequency accuracy at 25 degrees Celsius: ±30ppm Operating temperature: -10 to +60 degrees Celsius Maximum aging: ±10ppm/year Dimensions: (L) 5.0 x (W) 3.2 x (T) 1.4mm Temperature stability: ±50ppm Mode of oscillation: fundamental Maximum shunt capacitance: 7pF Load capacitance: 20pF and others

Material: copper tube, aluminum fin, and steel cover packing: packed in seaworthy carton Area of heat transfer: 2 to 25m2 Can be used in various specification Condensing units We supply all kinds of fin condenser with copper tube size of 3/8 and 5/16 inch

Material: Bundy tube (steel tube coated with copper): 4.76 x 0.7mm, 6 x 0.7mm, 6.35 x 0.7mm, and 8 x 0.7mm Steel wire: 1.0 to 1.6mm (both sides can be with steel plates and brackets, can be upon your choice) Structure: bundy tubes welded with steel wires Painting: cathode electrophoretic painting (black) We can supply the items according to customers drawings or samples

Raw material: bundy tube and steel wire Package: wooden case/export carton/pallet Certificate: RoHS, UL Our condenser types: Tube plate condenser Wire tube condenser Air cooled wire condenser Spiral condenser Shutter condenser for refrigerators, freezer, water coolers, and compressor units

Model: copper tube and fin type condenser Packing: by seaworthy cartons or pallets Size: according to customer's specific request Technical parameter: Area of heat transfer: 2 to 25m2 It can be used in various specification condensing units Welcome any size inquiry Our price is most competitive in China factories, and quality is available for any factory or market also We supplly all kinds of fin condenser with copper tube size of 3/8 and 5/16 inches

Raw material: bundy tube and steel wire Package: wooden case/export carton/pallet Certificate: RoHS, UL Our condenser type: Tube plate condenser Wire tube condenser Air cooled wire condenser Drum condenser Spiral condenser Shutter condenser for refrigerators, freezer, water coolers, compressor units

We can supply the wire tube condenser for freezer, deep freezer, and chest freezer Material: Bundy tube (steel tube coated with copper): 4.76 x 0.7mm, 6 x 0.7mm, and 6.35 x0.7mm Steel wire: 1.0 to 1.6mm (both sides can be with steel plates and brackets, can upon your choice) Bracket: 0.4 to 1.5mm Structure: bundy tubes welded with steel wires, brackets will be fixed with bundy tubes Painting: cathode electrophoretic painting (black) We can supply the items according to customers drawings or samples Packing: in standard carton, each piece separated by packing paper