Cat6 Ethernet Cable Structure: Conductor: ofc the bare copper wire (bc) solid core φ0.50mm insulation: hdpeφ0.98mm Shield: Longitudinal aluminum foil bag + Drain wire (φ0.50mm tinned copper wire tc) | Jacket: 1, gray pvc, φ6 .0 mm2, black pe, φ7.0mm Standard: yd/t1019-2001 use: digital communication horizontal twisted pair shielded cable, used in building integrated wiring system, work area and transfer of communication between the terminal wiring between the patch panel , and residential cabling system leads the user communications wiring between the patch panel ended to meet in 100m

Includes: 8 x 2 x 0.575mm BC conductor F-PE insulation Twisted pair screen First AL Mylar shield Overall braid screen Rip cord PVC sheath Conductor: Material: solid bare copper Number of pairs: 8 pairs AWG: 23 Conductor diameter: 0.575 ±0.003mm Insulation: Material: F-PE Diameter: 1.35 ±0.005mm Average thickness: 0.3875mm Minimum point thickness: 0.3870mm Twisted pair screen: AL foil (25%) First screen: AL foil (25%) Overall screen: TC (96/0.10mm) and braid (braid density: 40%) Jacket rid cord: optional Sheath: Material: PVC or LSOH Nominal diameter: 9.0 ±0.2mm Average thickness: 0.65mm Minimum point thickness: 0.645mm Operating temperature: -20 to 75°C Minimum bend radius (install): (OD) 8mm Flame test: CMX, CM, CMR and IEC60332-1 Reference standard: TIA/EIA568B and IEC/ISO11801

RJ45 patch cable, (connecting the PC to hub) RJ45 crossover cable (connecting the PC to PC for sharing the hard disk between 2 computer) Ethernet cable extender (an extra RJ45 female) it allows connecting with an existing Ethernet cable to have a extra 1.5M length SR-19 can be used for hotel network, to be placed on the wall or desktop surface We use an dual-glued pad to fix it on surface of wall and desktop Dimensions: 100 x 70 x 23mm Cable specifications: Cat6 standard (1,000M Ethernet rate)

With multifunction design With three functions: RJ45 patch cable (connecting the PC to HUB) RJ45 crossover cable (connecting the PC to PC for sharing the hard disk between two computers) Ethernet cable extender (an extra RJ45 female) it allows connecting with an existing Ethernet cable to have a extra 1.5m length Can be used in hotel network To be placed on the wall or desktop surface With a dual glued pad to fix it on surface of wall and desktop Cable specification: Cat 6 standard (1,000M Ethernet rate) Dimensions: 100 x 70 x 23mm

Includes: BC conductor Insulation Divider Separator Drain wire Aluminum Mylar shield Rip cord PVC sheath Conductor: Material: solid bare copper Number of pairs: 8 pairs AWG: 24AWG Conductor diameter: 0.575±0.003mm Insulation: Material: PE Diameter: 1.18±0.005mm Average thickness: 0.3025mm Minimum point thickness: 0.3020mm Divider: PP Separator: PET Drain wire: ?0.40mm TC Overall screen: aluminum mylar shield (superposition rate: 25%) Jacket rid cord: optional Sheath: Material: PVC or LSZH Nominal diameter: 6.8±0.2mm Average thickness: 0.6mm Minimum point thickness: 0.595mm Operating temperature: -20 to 75°C Minimum bend radius (install): (OD) 8mm Flame test: CMX, CM, CMR and IEC60332-1 Reference standards: TIA/EIA568B and IEC/ISO11801

Open/short wiring test Connected wires display Crossover wire display Testing of RJ11/ RJ12 Telephone cable Testing of RJ45 STP/ UTP Lan cable Testing of USB cable display Testing coaxial cable Testing IEEE1394 cable Power supplied by 9V Alkaline battery

Bandwidth up to 250MHz Works at 10/100/1000Base-T (IEEE802.3) speeds 100Mbps tp-pmd (ANSI x 3tp. 5); 55/155Mbps ATM TSB 568B pin-out (AT & T258A)

4-pair unshielded twisted pair cable Polyethylene separator for enhanced NEXT, ELFEXT, and RL Bandwidth 24AWG solid bare copper conductor for superior conductivity Meets EIA/TIA CAT6 specifications Durable, high-density polyethylene insulation, PVC jacket Installer-friendly cable shipped in reel-in-box packaging CM/CMG rated for single floor, general purpose use in walls and ceilings Verified compliant with EIA/TIA standards by ETL CSA listed Application: Ideal for 10M base-T (IEEE 802.3), 100M base-TX (IEEE 802.3u), 1,000M base-TX, 100 Vg-AnyLAN (IEEE 802.12), token ring (IEEE 802.5), TP-PMD (ANSI X3T9.5), 350Mbps CDDI, ATM 155, and all proposed Cat6 requirements for high-speed, full-duplex, and parallel transmission protocols

network-600 (Cat-6) Conductor: diam0.57mm (BC) Core dimension: diam1.0mm (PE) Nominal diameter: diam6.5mm Shielding: PVC flame-retardant yellow

Auto retractable cable: RCT-8 Retractable length: 2.5m Stander Cat6 Ethernet cable for laptop computer 2 pieces RJ45 female type/RJ11 adapter (both adapters can be placed into the case)

Temperature rating: 75 degree Celsius Spark test: 2,000V AC/0.15sec minimum Dielectric strength: 750V AC/1sec minimum Mutual capacitance: 5.6nF/100, maximum Pair to ground unbalance: 330pF/100M, maximum D-C resistance: 8.76 ohms/100M at 20 degree Celsius maximum D-C resistance unbalance: 5%, maximum Impedance: 100 +/- 15 ohms Material of conductor: bare copper Material of insulation: PE Insulation resistance: PE: DC-500V 1,500M ohms/100M minimum at 20 degree Celsius Overall jacket: PVC, PE, and LSOH Assembly type: snag-less molded boot, snag-free molded boot, and molded Rubber boots used for strain relief, protecting from the bending or other damages Pin-out: 568B straight through, 568A straight through, cross-over Connector: 50-micro gold plated RJ45 male/male connectors Rated temperature: 75 degree Celsius Cable colors: red, white, blue, yellow, black, green, gray, orange, purple, and pink Plug: 8P8C shielded or unshielded gold plated modular plugs with 50 micron gold plated Shield: UTP, FTP, STP, and SFTP Length: 1, 2, 3, and 4 up to 100ft (or as per requirement) AWG: 23, 24, 26, and 28AWG (optional)

Dual port auto retractable cable RCT-10 USB 2.0 and RJ45 plug in single retractable Both cable can work separately Case dimensions: 100 x 70 x 22mm

Includes: 25x 2 x 0.50mm BC conductor PE insulation Separator Cable tie Rip cord PVC sheath Conductor: Material: solid bare copper Number of pairs: 25 pairs AWG: 24 Diameter: 0.50 ±0.003mm Insulation: Material: HDPE and FRPE Diameter: 0.924 ±0.005mm Average thickness: 0.212mm Minimum point thickness: 0.2095mm Separator: PPE Cable tie: PE Jacket rip cord: optional Sheath: Material: PVC or PE Nominal diameter: 12.5 ±0.2mm Average thickness: 1.0mm Minimum point thickness: 0.995mm Operating temperature: -20 to 75°C Minimum bend radius (install): (OD) 8mm Flame test: CMX, CM, CMR and IEC60332-1 Reference standard: TIA/EIA568B and IEC/ISO11801

Includes: BC conductor PE insulation Petrolatum PE sheath Conductor: Material: solid bare copper Number of pairs: 4 pairs AWG: 24 Conductor diameter: 0.50 ±0.003mm Insulation: Material: HDPE and FRPE Diameter: 0.924 ±0.005mm Average thickness: 0.212mm Minimum point thickness: 0.2095mm Filling: petrolatum Sheath: Material: PVC or LSOH Nominal diameter: 5.5 ±0.2mm Average thickness: 0.65mm Minimum point thickness: 0.645mm Operating temperature: -20 to 75°C Minimum bend radius (install): (OD) 8mm Flame test: CMX, CM, CMR and IEC60332-1 Reference standard: TIA/EIA568B and IEC/ISO11801

RJ45 retractable cable LAN retractable cable 75cm

Cat 5e network LAN cable: orange Available sizes: 1, 2, 3, 5, 10, 15, 20, 30m Available in Different lengths and colors

CAT 5E surface-mount type Dual ports With keystones

CAT 5E surface-mount type Single port With keystone

4-pairs UTP Cat 5e (outdoor) Conductor: diam0.50mm (BC) Core dimension: diam0.9mm (PE) Nominal O.D: diam7.0mm Shielding PVC: flame retardant gray/PE black

Auto Reel up to 1.3M RJ11 6P6C Modem cable RoHS compliant OEM cable is welcome