Powerful receiver for digital TV and Radio programs. Main features are a 250 MHz PowerPC (350 Mips), Linux OP and the dreambox DM7020 supports standard Linux API (DirectFB, Linux-FB, LIRC, ...) 10/100MBit compatible Ethernet Interface DSL communication port All devices of series DM7020 have an embedded analoge modem Technical datas - 250 MHz PowerPC Processor(350 Mips) - Linux open source (most parts under the terms of GPL) - Supports Linux Standard API (Direct-FB, Linux-FB, LIRC) - 1 x DVB Common-Interface Slot - 2 x Smartcard-Reader - Integrated Compact Flash Interface Slot - MPEG2 Hardware decoding (fully DVB compliant) - Common NIM DVB-S - 10/100 MBit compatible Ethernet Interface - modem - USB Port - 12V switch cinch - V. 24/RS232 Interface - Big-size LC-Display - 32 MByte Flash - 96 MByte RAM - integrated IDE UDMA66 Interface - Support for internal HDD in any capacity - unlimited channel lists for TV/Radio - channel-change time < 1 second - full automatic service scan - supports directly bouquet-lists - supports EPG (electronic program guide)' - supports own videotext - supports multiple LNB-Switching control (supports DiSEqC) - fully adaptable OSD in many languages and skin-support - S/PDIF Interface for digital bit stream out (AC-3) - 2 x Scart-interfaces - RF modulator - Audio/Video cinch out - MINI-DIN connector for extern IR (send) DreamBox DM7020 technical data DBS-Tuner: Frequency Range 950.2150 MHz Signal Level - 65 dBm. - 25 dBm Signal-to-Noise Level 12 dB max. DBS-Tuner Input Connector F-Type female Input Impedance 75 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8 Roll-off Factor 35 % Demultiplexing according ISO 13818-1 Common-Interface: Common-Interface Power Consumption max. 0, 3A/5V Video decoder: Video Compression MPEG-2 and MPEG-1 compatible Video Standard PAL G/ 25 Hz Video Formats 4: 3 / 16: 9 Letterbox for 4: 3 TV-Device Audio decoder: Audiokompression MPEG-1 &mp; MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Output analog: Output Level L/R 0, 5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Output digital: Output Level 0, 5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard> TV-Scart: Output: FBAS, RGB, S-Video over OSD selectable VCR-Scart: FBAS Serielle Interface RS 232: Typ RS232 bidirectional Bitrate 115, 2 kBit/s max. Plug Connector SUB-D-9 Function: Update of Firmware Ethernet: 10/100 MBit compatible interface Function Update of Firmware USB: USB 1.2 connector Mini DIN: I2C for steering of external devices IR funktion Pins: 1 5V 2 SDA (I2C-Kanal 2) 3 SCL 4 3, 3V 7 GND 8 IR-Output 9 GND UDMA66 IDE Interface: Intern for connect HDD Compact Flash - Reader LNB power and polarisation: LNB Current 500mA max.; Short-circuit-protected LNB Voltage vertical < 14V no load, > 11, 5V at 400mA LNB Voltage horizontal < 20V no load, > 17, 3V at 400mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Power consumption: < 20W (in operation, horizontal polarization / 400mA LNB current) < 11W (in operation, no LNB) < 4W (Deep-Standby-Mode) Input voltage: 230V / 50 Hz alternating current +/- 15% Physical specification: Ambient Temperature +15 oC...+35 oC Humidity < 80% Size (W x D x H): 374 mm x 230 mm x 75 mm Weight: 2 kg without HDD